VRM – SERIES
MEDIUM PRESSURE CENTRIFUGAL FAN
- V = 200 ÷ 30000 [m3/h]
- Pt = 400 ÷ 5600 [Pa]
High efficiency VRM series fans are used for on-board applications requiring medium pressures and high flow rates.
Download PDF
They are suitable for suction of fumes or exhalations and in general for all applications where it is necessary to move clean or slightly dusty air through suction or delivery ducts.
The scroll is made of sheet steel with edged and welded profile, provided with a fixing flange on the delivery side, with holes allowing an orientation of 45 degrees, and a mouthpiece on the suction side; the motor-holding disk allows reversible assembly in versions 4 and 5.
The high-efficiency impeller/strong> with backward curved blades is made of welded carbon steel and balanced both statically and dynamically in direct coupling with asynchronous three-phase or single-phase 2/4/6 pole motors in B5 or B3 construction and in continuous duty S1 according to UNEL-MEC and IEC standards.
The air temperature not exceed 80°C This limit may be exceeded only in special execution.
The scroll is made of sheet steel with edged and welded profile, provided with a fixing flange on the delivery side, with holes allowing an orientation of 45 degrees, and a mouthpiece on the suction side; the motor-holding disk allows reversible assembly in versions 4 and 5.
The high-efficiency impeller/strong> with backward curved blades is made of welded carbon steel and balanced both statically and dynamically in direct coupling with asynchronous three-phase or single-phase 2/4/6 pole motors in B5 or B3 construction and in continuous duty S1 according to UNEL-MEC and IEC standards.
The air temperature not exceed 80°C This limit may be exceeded only in special execution.
Contact us for a quote or for technical support on the selection of your industrial fan.
